Products
A Y M Meter Outlet/Bypass Ball Valves - 857 Series
A Y McDonald Meter Outlet/Bypass Ball Valves – 857 Series
TAMPERPROOF, LOCKWING, BYPASS OPTION, UNION
Can be assembled directly to the meter outlet, or used with a meter bar that provides a solid anchor to the meter set. This valve can be
produced with or without a Bypass feature. These valves are designed for use with natural, manufactured and L.P. gas only.
Features:
– Soft seat design does not rely on grease to prevent leakage to the atmosphere or through the valve seats. Sealing capability is
maintained even after many cycles.
– Tamper-resistant (Tamperproof) design makes the A.Y. McDonald Ball Valve virtually impossible to disassemble without making the
valve unusable, i.e. pinned end piece requires excessive force to remove and valve cannot be reassembled if forcefully disassembled.
The valve utilitizes an internally loaded operating stem. The external cap is secured with a tamper-resistant stainless steel screw.
– Breaking torques are closely controlled in excess of what can be turned “by hand” and yet low enough to ensure easy turning with a
small wrench. Easy turning remains for normal life of valve.
– A 90º rotation provides complete shut-off from the open position. Valve can be rotated full 360º.
– In addition to an o-ring, metal-to-metal positive seating of the end piece limits the squeeze on port seals, and serves
as back-up seal if necessary.
– Traditional lockwing design easily accommodates standard Barrel-Locks or padlocks.
– 1” is reducing port.
– No field adjustment or maintenance required.
– Each valve is pressure tested in both directions electronically or with air under water.
– Temperature Range: –20º to +150ºF.
– No field adjustment or maintenance required.
– Each valve is pressure tested in both directions electronically.
– Temperature Range: –20oº to +150ºF.
– Soft seat design does not rely on grease to prevent leakage to the atmosphere or through the valve seats. Sealing capability is
maintained even after many cycles.
– Tamper-resistant (Tamperproof) design makes the A.Y. McDonald Ball Valve virtually impossible to disassemble without making the
valve unusable, i.e. pinned end piece requires excessive force to remove and valve cannot be reassembled if forcefully disassembled.
The valve utilitizes an internally loaded operating stem. The external cap is secured with a tamper-resistant stainless steel screw.
– Breaking torques are closely controlled in excess of what can be turned “by hand” and yet low enough to ensure easy turning with a
small wrench. Easy turning remains for normal life of valve.
– A 90º rotation provides complete shut-off from the open position. Valve can be rotated full 360º.
– In addition to an o-ring, metal-to-metal positive seating of the end piece limits the squeeze on port seals, and serves
as back-up seal if necessary.
– Traditional lockwing design easily accommodates standard Barrel-Locks or padlocks.
– 1” is reducing port.
– No field adjustment or maintenance required.
– Each valve is pressure tested in both directions electronically or with air under water.
– Temperature Range: –20º to +150ºF.
– No field adjustment or maintenance required.
– Each valve is pressure tested in both directions electronically.
– Temperature Range: –20oº to +150ºF.
Note: These valves are intended for use with natural, manufactured and L.P. gas only.
COATINGS AVAILABLE
857B Black Iron
857G Zinc Coated w/Clear Sealant Finish Iron
857N Zinc Plated Clear Sealant /Painted Finish
857P Painted Finish
Taps available on all the above product options.
857B Black Iron
857G Zinc Coated w/Clear Sealant Finish Iron
857N Zinc Plated Clear Sealant /Painted Finish
857P Painted Finish
Taps available on all the above product options.
